Dynamic lighting controller for automatic transmission Ford Escape (Light_ATS)

The controller is designed to dynamically display the engaged position of the automatic transmission selector.
The controller connects to the CAN bus MS-CAN and analyzes data packets, turning on the lamps at the right time. The brightness of the backlight is tied to the overall brightness in the car and can be adjusted with standard buttons along with all devices.

How to connect a device:
- unplug the battery;
- remove the faceplate on the tunnel;
- remove gear selector cover;
- if standard lighting is installed, it needs to be unplugged and removed.;
- if you need to erase the filter on the selector cover, so that all letters in the light were without color distortion;
- fix diffuser and backlight board;
- connect CAN bus signal wires (for example, on the climate control unit, connector C2357B: 5 - + Ms-can, 6 – Ms-can);
- connect power* (for example, on the climate control unit, connector C2357B: 26 - +12IN, 1 – GND);
- connect the connectors to the backlight board and the controller;
- connect battery terminal;
- check device performance.

Application !!!
This controller is installed on Ford Escape vehicles. For dorestyle and restyling, different sizes of boards with LEDs, therefore, in the note to the order, indicate which car you plan to install.