Services

It just so happened, that in our activities we do not go in one direction, we try to develop in several directions at the same time. That is why we provide services in the production of LED modules, development of light control boards based on microcontrollers, We relight instrument panels in different cars, We also sell CNC machines and their components from trusted suppliers.

The same cannot be said about LEDs., that this is the future, this is already reality and present. LEDs are used almost everywhere. We offer a wide range of LED products and LED modules not only for domestic, but also consider options for manufacturing unique lights for modern cars. Choose a product from our catalog, and if you have your own ideas, we will help you turn them into a finished product.

Dashboard car, this is the main indicator of its condition, which the driver must constantly monitor. But when she has bad backlight, the information displayed on it is unreadable or simply not noticeable. We fulfill printed circuit board manufacturing with LED illuminated arrows, scales and on-board computer, which significantly improves the overall appearance of the dashboard and information content. If your dashboard is not in our catalog, send it to us for measurements or we will make a board according to your template. We make boards from single-sided fiberglass 1mm thick by milling tracks on a CNC machine.

Controllers for light control very useful in the car, they are designed to make it easier and even free the driver to think about the need to turn it on, the device will do this according to the established algorithm. We manufacture controllers that:

– automatically turn on the lights in DRL mode (far to the floor glow);

– The brake light flashes during emergency braking;

– turn off one DRL lamp when turning on the turn;

– control interior lighting;

– control the dashboard lighting;

– corner extensions, etc..

Xenon car lamps – is a gas-discharge light source, which provides a very bright glow, close to natural daytime. A special feature of the work is the presence of xenon gas in the flask with an electric arc. In such a circuit there is no need to use an incandescent filament, which can easily burn out due to voltage changes.

The HID lamp uses a mixture of inert gases to operate., which, when electrical energy is passed through, begin to emit light. Mercury vapor is also added to xenon, which ensure the operation of the light source under high pressure.

The color of the light depends on the composition of the mixture. For example, the xenon itself glows bright white, while a mixture with mercury vapor produces a colder, bluish glow. Therefore, options with a mixture of gases are mainly used in medicine - they are excellent for room sterilization and ozonation.

Advantages of xenon lamps:

1. Durability of work. The absence of an incandescent filament makes such lamps more durable, than usual. Besides, they can be used in extreme working conditions, which is also a significant advantage. On average, The light source with a xenon mixture is replaced after 100 000 kilometers, but in most cases this figure is greatly underestimated, and the lamps last up to 200 000;
2. High brightness and light output. Xenon models have a light output of 2,5 times higher, than halogen. Therefore, they are used to ensure the best visibility of the road at night.. Such lamps are often called anti-fog lamps, etc. To. even in the most shaded areas they can provide almost perfect lighting;
3. Natural low beam temperature. Halogen lamps, which are often used for car headlights, emit a yellowish glow, which is unusual for the human eye and can somewhat distort visibility. In this case, xenon glows white when burning, which increases the safety of the driver and pedestrian;
4. Low electrical energy consumption. To operate the lamp, no more than 30 Watt of energy, which helps save battery. It should also be noted the low load on the on-board computer during operation;
5. High efficiency indicators. A standard incandescent lamp has an efficiency equal to 30 %. Most of the incoming energy is converted into heat, but xenon emits a cold glow. This characteristic speaks not only about the color of light, but also heating the lighting fixture. More than half of the incoming power is aimed specifically at providing lighting.

You can buy xenon gas-discharge lamps in our store, the price depends on the type and parameters of the device. We recommend studying the catalog of well-known companies: Phillips, Galaxy and others, etc. To. they come with a guarantee.

CNC machines (numerical control) – this is high-tech equipment, in which actuators (drives) controlled automatically. Drives, controlled according to a specific program, activate the working element of the machine - this is the principle of operation of CNC equipment. Depending on the purpose of the machine, the working element may be a spindle, drill, punch, etc..

Machinery equipment park, equipped with CNC, vast and varied. It is enough to list only the most basic: these are lathes, milling, grinding, metal-cutting, drilling machines, which are divided into many types and modifications. Complex and varied production requires equally sophisticated equipment. However, with all the variety of types and models, the operating principle of CNC machines comes down to the availability of software, setting the machine operation algorithm.

CNC machines do not require highly qualified specialists – machine tool, it is enough to train staff in program management techniques. CNC machines are modern equipment, allowing to ensure high labor productivity with the excellent quality of the work performed. The use of such machines significantly increases the overall level of production culture.

Choose a CNC machine model or components for them in our catalog and we will deliver it as soon as possible.